skip to main content

OSU Navigation Bar

The Ohio State University

Facilities Operations and DevelopmentServices

 

Lighting Standards

 

Lighting Levels

This section contains specifications for the various lighting structures throughout the university. We design for the following lighting levels ...

1. Primary walkways & problem areas 2 foot candles (FC) average & .5 FC minimum

2. Secondary walkways & other areas 1 FC average & .25 FC minimum

3. Primary streets 2 FC average & .667 FC minimum

4. Parking lots 1 FC average & .25 FC minimum

5. High activity outdoor parking (i.e., St. John Arena) 2.4 FC average & .6 FC minimum

 

Downloads

You can download any drawing files (all drawings are AutoCAD R14) individually, below, or you can download all of the drawings in one file (2.9 MB). Note that these details are for reference only. Refer to contract documents for bidding requirements.

 

The AutoCAD drawing file(s) are for your reference on the project you are currently employed by the University to work on. The data contained in the drawing file(s) is issued to you with the following limitations:

  • This data is for reference only. The Consultant, by choosing to use this data, is accepting full responsibility for the data contained on the documents and shall field verify all conditions and statements shown. The University will not be held liable for errors or omissions relating to this information. Clear reference to the origin of the drawings shall be indicated on all applicable sheets, including the date the files were downloaded.
  • This data shall not be used on any other projects or advertisements done by the Consultant.
  • This data shall not be stored or distributed to anyone outside the Consultant's office unless approved in writing.

 

The origination of this data shall be clearly indicated on the final drawing(s) produced by the Consultant ... a note shall be placed on the drawing to read, "Segments of the data shown on this drawing have been provided in digital (electronic) format by The Ohio State University - Facilities Operations and Development for use on this project."

 

To uncompress the zip file(s), copy them onto a hard drive and run pkunzip or WinZip. The result will be uncompressed files in the format you requested. At this point, you can delete .zip file(s) from your hard drive, if you wish. The files will uncompress into the subdirectory that the .zip file(s) is in. You may download a free evaluation version of WinZip.

 

 

Categories

 

Luminaires

This complete lighting unit can be pole-mounted or wall-mounted.

Hadco S-4989-N Type III CAD drawing
Hadco S-4989-M Type V CAD drawing
Holophane OSU-Granville CAD drawing
Holophane OSU-State CAD drawing
Wall Mount Assembly CAD drawing

 

 

Lighting - polesPoles

Poles come in 3 heights ...
14' ornamental poles,
18' parking lot poles,
20' ornamental street lights.

14' ornamental

18' parking lot 20' ornamental
detail detail detail
CAD drawings CAD drawings CAD drawings
specifications specifications specifications
anchor bolt detail anchor bolt detail anchor bolt detail
concrete collar detail concrete base detail concrete collar detail
identification field identification field identification field
id tag specs id tag specs id tag specs
collar specs collar specs
pole base detail pole base detail
streetlight foundation
foundation specs

 

 

Lighting - bollardsBollards

A series of short posts set at intervals serves to delimit an area (such as a traffic island) or exclude vehicles.

Cast Iron Lighting Bollard   CAD drawing & specs
Bollard specs
Anchor Bolt Template   CAD drawing
Concrete Collar   CAD drawing & specs
Collar specs
Bollard Foundation   CAD drawing & specs
Foundation specs

 

 

Lighting - accessoriesAccessories

These accessories supplement the pole or lamp assemblies.

Pole Banner Arm   CAD drawing
ID Field Tag   CAD drawings & specs
ID Tag specs